Home › Plumbing › Plumber cost
How much does a plumber cost in the UK?
A plumber in the UK typically charges £40 to £60 an hour, with £50 an hour the usual figure, and a day rate of £320 to £480. But the price you actually pay depends on where you live, how urgent the job is and what needs doing. This guide gives you the published rates, the cost of the most common jobs, and a calculator — so you know what a fair quote looks like before anyone picks up a wrench.
Last updated: 21 November 2026 • Prices are ballpark averages from published UK cost guides, not quotes.
Plumber costs at a glance
- £50 an hour is the typical plumber hourly rate (£40–£60 range)
- £400 a day is the typical day rate (£320–£480 range)
- £100 an hour is the typical emergency rate (£75–£150 range)
- £110 is the typical call-out fee (£100–£120 range)
- London costs roughly double the rest of the UK — about £108 an hour on average
How much does a plumber cost per hour?
Most UK plumbers charge by the hour for small jobs and fault-finding, because it is hard to know in advance how long the work will take. Checkatrade's cost guide, last updated in October 2026, puts the standard hourly rate at £40 to £60 an hour, averaging about £50. For a full day's work, plumbers usually switch to a day rate instead, which works out cheaper per hour.
| Plumber rates | Typical cost |
|---|---|
| Standard hourly rate | £40–£60 (avg £50) |
| Day rate (8 hours) | £320–£480 (avg £400) |
| Emergency hourly rate | £75–£150 (avg £100) |
| Call-out fee | £100–£120 (avg £110) |
Source: Checkatrade plumber cost guide, last updated October 2026. Costs are ballpark averages — get a local tradesperson to quote for your job.
HomeServe, another large UK provider, gives a similar picture: a day rate of £350 to £460 and emergency work at around £86 an hour. The two sources agree closely, which is a good sign the figures are realistic.
Cost calculator
Pick the job, your region and how urgent it is. The calculator gives a ballpark range from published UK cost guides — it is an estimate, not a quote.
Ballpark estimate only. Always get a written quote from a local plumber before work starts.
Common plumbing jobs and what they cost
Hourly rates are only half the story. Most homeowners hire a plumber for a specific job, and for common jobs the trade publishes typical fixed prices. These are the figures from Checkatrade's October 2026 guide:
| Job | Typical cost | Average |
|---|---|---|
| Unblock a toilet | £75–£150 | £100 |
| Fix a leak | £77–£128 | £100 |
| Repair a burst pipe | £50–£200 | £150 |
| Install a radiator | £150–£180 | £165 |
| Replace a water tank | £360–£450 | £405 |
Source: Checkatrade plumber cost guide, October 2026.
Unblock a toilet: £75–£150
A straightforward blockage is usually a quick job — often under an hour. The price rises if the blockage is further down the pipe or if the toilet has to be removed to reach it. If you have tried a plunger and the water still will not drain, call a plumber rather than pouring chemical drain cleaner down the toilet, which can damage older pipes.
Fix a leak: £77–£128
Leaks vary enormously. A dripping tap washer is a small job; a leak hidden behind a wall or under a floor is not, because finding it takes time and may involve opening up the wall. The average of about £100 covers a typical visible leak repair. If water is coming through a ceiling, turn the water off at the stopcock first and call an emergency plumber.
Repair a burst pipe: £50–£200
Burst pipes are a winter problem — water freezes, expands and splits the pipe. A simple repair on an accessible pipe can cost as little as £50, but if the pipe is boxed in, under a floor or the burst has caused water damage, the bill climbs quickly. The average is about £150, but that does not include repairing any water damage to walls, floors or ceilings, which is a separate job.
Install a radiator: £150–£180
This is a like-for-like swap on existing pipework — taking the old radiator off and fitting a new one in the same place. If new pipework is needed, or you are moving the radiator to a different wall, expect to pay more: moving a radiator typically costs around £275. See our radiator replacement cost guide for the full breakdown by radiator type.
Replace a water tank: £360–£450
Replacing a cold water storage tank in the loft typically costs £360 to £450 including the tank and labour. The price depends on the size of the tank and how easy the loft is to access. If the supporting platform or the pipework also needs replacing, the cost rises.
Plumber rates by region: London costs double
Where you live makes the biggest difference to what a plumber charges. Less.co.uk analysed official ONS pay data and found that London plumbers charge about £108 an hour on average — roughly double the rest of the country. At the other end of the scale, the South West averages about £44 an hour.
| Region | Typical hourly rate | Notes |
|---|---|---|
| London | ~£108 | Roughly double the UK average; parking and congestion add to the bill |
| South East | £50–£75 | Above average, but well below London |
| Rest of the UK | £40–£60 | Checkatrade national range, averaging £50 |
| South West | ~£44 | The lowest regional average in the ONS data |
London and South West figures: Less.co.uk analysis of ONS data. National range: Checkatrade, October 2026. Figures for other regions are the national range — we do not publish regional figures we cannot check.
What is included in a plumber's quote?
A proper written quote should spell out exactly what you are paying for. Check that it includes:
- Labour — the hourly or day rate, and how many hours or days the job is expected to take.
- Materials and parts — pipes, fittings, valves, the radiator or tank itself. Ask whether parts are included or charged on top.
- VAT — ask directly whether the price includes VAT. Smaller firms are often not VAT-registered; larger firms usually add 20%.
- Call-out fee — some plumbers charge a call-out fee on top of labour; others include the first hour in it.
- Guarantee — most reputable plumbers guarantee their work for at least 12 months. Get it in writing.
- Clearing up — a good plumber leaves the area clean. If the job involves opening a wall or floor, ask who makes it good afterwards.
Hidden costs to watch for
The quote is not always the final bill. These are the extras that catch homeowners out:
- Emergency premiums. A Sunday night call-out can cost double the daytime rate. If the problem can wait until morning, it usually should.
- Parts. A £50 washer is cheap; a new pump, valve or section of pipework is not. Ask the plumber to confirm the price of any part before they fit it.
- Access. If pipes are boxed in, tiled over or under a solid floor, getting to them takes time — and time is what you pay for.
- Water damage. Fixing the leak is one job; repairing the ceiling, floor or plaster it damaged is another, and it is rarely in the plumber's quote.
- Parking and congestion. In London, parking charges and the congestion charge are sometimes passed on to the customer.
- Minimum charges. Many plumbers have a minimum charge — often the first hour — even for a ten-minute job.
What affects the cost of a plumber?
- Location. London is roughly double the rest of the UK; rural areas can also cost more if the plumber has to travel.
- Urgency. Emergency and out-of-hours work costs far more than a booked daytime visit.
- Complexity. A visible tap washer versus a leak inside a wall are two very different jobs.
- Access. Easy-to-reach pipework is cheap; pipework under floors or behind tiles is not.
- Parts. Standard fittings are cheap; specialist or branded parts cost more and may need ordering.
- Time of year. Winter is peak season for plumbers — burst pipes and boiler breakdowns — and the busiest plumbers charge more.
DIY or hire a plumber?
Some small jobs are fine to do yourself: unblocking a sink with a plunger, replacing a tap washer, or bleeding a radiator. But there are clear limits. Anything involving the mains water supply, a burst pipe, or a leak you cannot find should go to a professional — a small mistake with water can cause thousands of pounds of damage. And any work on a gas boiler or gas pipe must by law be done by a Gas Safe registered engineer. If you are not sure, the safe choice is to call a plumber.
How to save money on a plumber
- Get three quotes for any job over a few hundred pounds. Prices for the same job can vary by 50% or more.
- Book ahead. A planned daytime visit costs far less than an emergency call-out.
- Combine jobs. If you need a radiator fitted and a tap fixed, getting both done in one visit saves a second call-out fee.
- Be ready. Clear access to the work area before the plumber arrives — moving furniture and emptying cupboards yourself saves paid time.
- Ask what is included. A cheaper quote that excludes parts and VAT is not actually cheaper.
Frequently asked questions
How much does a plumber cost per hour in the UK?
Most plumbers charge £40 to £60 per hour, with £50 an hour the typical figure, according to Checkatrade's October 2026 cost guide. In London, hourly rates are roughly double the national average — around £108 an hour on average, based on ONS data published by Less.co.uk.
How much is a plumber's call-out fee?
A call-out fee is usually £100 to £120, averaging about £110 (Checkatrade, October 2026). Many plumbers include the first hour of work in the call-out fee, but not all do — ask before you book.
How much does an emergency plumber cost?
Emergency plumbers typically charge £75 to £150 an hour, averaging about £100 an hour (Checkatrade). Evening, weekend and bank holiday call-outs cost the most. If the problem can wait until morning, you will usually pay the standard rate instead.
Do plumbers charge VAT?
It depends. Many smaller plumbing firms are not VAT-registered, so their prices have no VAT added. Larger firms and companies usually add 20% VAT. Always ask whether a quote includes VAT, so you are comparing like with like.
How much does it cost to unblock a toilet?
Unblocking a toilet typically costs £75 to £150, averaging about £100 (Checkatrade, October 2026). A simple blockage is usually a quick job; if the blockage is further down the drain, it can take longer and cost more.
How do I find a good plumber near me?
Ask friends and neighbours for recommendations, and get at least three written quotes for any job over a few hundred pounds. Check reviews on Checkatrade or MyBuilder, and confirm the plumber is insured. For any gas work, the engineer must be Gas Safe registered — check the Gas Safe Register before they start.
Related cost guides
Sources: Checkatrade plumber cost guide (October 2026); Less.co.uk analysis of ONS pay data; HomeServe day rates. Prices are ballpark averages for the UK, last updated 21 November 2026. Always get a local tradesperson to quote for your job.