Home › Heating › Radiator replacement cost
Radiator replacement cost in the UK
Replacing a radiator in the UK typically costs £150 to £250 fitted for a standard panel radiator swapped like for like — new radiator, valves and labour included. The price rises with the size and style of the radiator, and jumps further if new pipework is needed. This guide covers every radiator type, the cost of moving one, regional prices, and a calculator.
Last updated: 21 November 2026 • Prices are ballpark averages from published UK cost guides, not quotes.
Radiator replacement costs at a glance
- £150–£250 fitted for a standard panel radiator, like for like
- ~£200 to remove and replace a double-panel radiator
- £150–£300 is the typical labour cost for fitting a radiator
- ~£275 to move a radiator to a new position
- £1,500–£3,000 for a full house re-rad (about 10 radiators)
How much does it cost to replace a radiator?
The biggest variable in radiator replacement cost is whether new pipework is needed. If you are swapping a like-for-like unit on existing pipework, the job is straightforward — drain down, swap, refill and balance — and usually takes 1 to 2 hours. If you are adding a radiator to a room that does not have one, the pipe run is where most of the cost comes from.
| Job | Typical cost | Average |
|---|---|---|
| Remove a small radiator | £80 | 1 hour |
| Remove and repair a radiator | £100–£150 | 1–2 hours |
| Remove and replace a double-panel radiator | £200 | 1–2 hours |
| Replace a large radiator | £300 | 2 hours |
| Move a radiator | £275 | 2 hours |
| Remove up to six radiators and flush the system | £350 | — |
Source: Checkatrade radiator replacement cost guide, June 2026. Labour to fit a radiator is typically £200 to £300 depending on size and pipework.
Cost calculator
Pick the job, your region and how urgent it is. The calculator gives a ballpark range from published UK cost guides — it is an estimate, not a quote.
Ballpark estimate only. Set the quantity for more than one radiator. Always get a written quote from a local plumber or heating engineer before work starts.
Radiator replacement cost by type (supply and fit)
Standard panel radiators are the cheapest to replace. Designer, vertical and column radiators cost more — both for the unit itself and for the extra time they take to fit, because they are heavier and often need different fixings.
| Radiator type | Supplied & fitted |
|---|---|
| Single panel radiator | £150–£250 |
| Double panel radiator | £180–£300 |
| Horizontal radiator | £160–£280 |
| Vertical radiator | £200–£350 |
| Column radiator | £220–£400 |
| Heated towel radiator | £180–£320 |
Source: Checkatrade, June 2026. Less.co.uk gives the same like-for-like range of £150 to £250 fitted, and puts designer radiators supplied and fitted at £300 to £1,000 depending on the model.
For the radiator unit alone, without fitting, MyBuilder lists single panel radiators at £20 to £60, double panel at £50 to £90, column radiators at £200 to £320 and designer radiators at £180 to £1,700. The unit is often the smaller part of the bill — labour is usually £150 to £300.
Radiator prices by region
Less.co.uk publishes regional prices for a like-for-like radiator swap, based on BCIS location factors. London is the dearest, at about 17% above the UK average.
| Region | Typical fitted price | vs UK average |
|---|---|---|
| London | £230 | +17% |
| South East | £210 | +7% |
| East of England | £210 | +5% |
| North West | £200 | +2% |
| UK average | £200 | — |
Source: Less.co.uk, November 2026. Other regions fall near the UK average; we do not publish regional figures we cannot check.
What is included in a radiator replacement quote?
- The radiator itself — size, style and heat output (BTU rating) to match the room.
- Valves — new thermostatic radiator valves (TRVs) are normally fitted. Building Regulations Part L requires TRVs in many cases. TRVs may be extra, so ask your plumber to confirm what is included.
- Labour — draining down, fitting, refilling and balancing the system.
- Disposal — taking the old radiator away.
- Bleeding and balancing — after fitting, the system needs bleeding and balancing so every radiator heats evenly.
Extra costs to watch for
- New pipework. Adding a radiator where there is not one costs about £350 where the pipes are close by, and up to £600 for a long pipe run (Less.co.uk).
- TRVs. Thermostatic radiator valves may be charged separately — confirm before work starts.
- System flush. Removing up to six radiators and flushing the central heating system costs around £350 (Checkatrade). A sludged system heats badly and damages boilers.
- Designer and column radiators. Heavier, need stronger fixings, and take longer to fit — £300 to £1,000 fitted for a designer radiator.
- Cast iron radiators. The unit alone can cost £300 to £700, with installation of £150 to £350 because of the weight — £450 to £1,050 in total (Ideal Home).
- Electric radiators. Switching to a modern electric radiator, including removal and installation with hardwiring, can cost around £200 to £500 (Ideal Home).
What affects the cost of replacing a radiator?
- Type and size. A small single panel is cheap; a large designer or column radiator is not.
- Pipework. Like-for-like on existing pipes is the cheapest job. New pipe runs are where the money goes.
- Access. Radiators behind heavy furniture or in rooms with solid floors take longer to reach.
- System condition. Old, sludged systems may need flushing, and old valves may need replacing too.
- How many. Replacing several radiators in one visit is cheaper per radiator than one at a time, because the system only needs draining once.
- Region. London is about 17% above the UK average for a like-for-like swap.
DIY or hire a plumber?
Bleeding a radiator is a simple DIY job anyone can do with a radiator key. Replacing a radiator is a bigger step: you need to drain the system, handle heavy units, make watertight joints and refill and balance the system afterwards. A confident DIYer can do a like-for-like swap, but a leak on a pressurised heating system can cause serious water damage. If the work involves the boiler or new pipework, hire a plumber or heating engineer.
How to save money on radiator replacement
- Replace several at once. The system is drained once, so the cost per radiator falls.
- Stick with like-for-like. Same size, same position, existing pipework — the cheapest possible job.
- Choose standard panel radiators where looks do not matter, for example in bedrooms and hallways, and save designer models for the rooms people see.
- Get three quotes and check whether TRVs and disposal are included in each one.
- Book in summer. Heating engineers are quietest outside the winter rush, and more likely to offer a better price.
Frequently asked questions
How much does it cost to replace a radiator in the UK?
Replacing a standard panel radiator like for like typically costs £150 to £250 fitted, including the new radiator, valves and labour (Less.co.uk, November 2026). Checkatrade puts a double-panel replacement at around £200, with labour of £150 to £300 depending on size and pipework.
How long does it take to replace a radiator?
A straightforward like-for-like swap usually takes 1 to 2 hours. Moving a radiator or running new pipework takes longer — around 2 hours for a move, and half a day or more if new pipes have to be run.
How much does it cost to move a radiator?
Moving a radiator typically costs around £275 (Checkatrade, June 2026), because the pipework has to be extended or re-routed. If the move is a long way from the existing pipes, the price rises.
How much does it cost to replace all the radiators in a house?
A full house re-rad — about 10 radiators in a typical 3 to 4 bedroom house — typically costs £1,500 to £3,000 fitted (Less.co.uk), or around £2,000 from an entry-level perspective (Ideal Home).
Do I need a plumber or a heating engineer to replace a radiator?
Either a plumber or a heating engineer can replace a radiator. For a like-for-like swap, a general plumber is fine. If the work involves the boiler, new pipework or a system change, a heating engineer is the better choice. Gas work must always be done by a Gas Safe registered engineer.
Will I need new valves when I replace a radiator?
Usually, yes — new thermostatic radiator valves (TRVs) are normally fitted with a new radiator, and Building Regulations Part L requires TRVs in many cases. Some quotes include them and some do not, so ask your plumber to confirm what is included.
Related cost guides
Sources: Checkatrade radiator replacement cost guide (June 2026); Less.co.uk radiator cost guide (November 2026, BCIS regional factors); Ideal Home radiator replacement costs; MyBuilder radiator replacement costs 2026. Prices are ballpark averages for the UK, last updated 21 November 2026. Always get a local tradesperson to quote for your job.